212-529-2740

Shopping Cart

Your cart is currently empty.

Tag Archives: Decorative Trims

Hat and Scarf Set with Polar Puff Trim

Polar Puff Hat & Scarf

 

Supplies: Hat and Scarf Set with Polar Puff Trim

Purchased Fleece Hat or/create your own using a favorite pattern and fleece fabric
Fleece Fabric ( scarf ) – 1/4 yard
Assorted colors of Polar Puff Trim

How to:   Hat and Scarf Set with Polar Puff Trim

Cut two 54” x 5” strips. Trim ends at 45 degrees.

With right sides together, stitch the scarf front and back together using a 1/2” seam and leaving a 4” opening along one side. Clip corners.

Turn right side out and press carefully. Hand stitch the opening closed

Stitch Polar Puff trim 3/4 “ in from outside edges of the scarf, overlapping the ends.

Stitch Polar Puff trim to the right side of the hat’s bottom edge, overlapping the ends.

Roll the bottom edge of the hat back onto itself , forming a cuff.

Hand stitch Polar Puff flowers to the hat’s cuff, placing them slightly to one side of the center front.

Polar Puff - Child's Hat & Scarf

Creating Polar Puff Flowers

Wrap Polar Puff into a tight spiral until you have achieved the size desired. Cut Polar Puff and then using a needle and thread; stitch into the the back of the spiral to secure. Add a second color of Polar Puff continuing the spiral and stitching as you wrap.

Polar Puff - Child's Hat & Scarf

DIY Wedding Night Elegance with Decorative Trimmings

Wedding Night Elegance

With the addition of rows of lace trimmings and a quick stencil project, a simple set of sheets becomes a lovely wedding gift for any new couple.  DIY Wedding Night Elegance with decorative trimmings is truly a gift from your heart.

Supplies for Wedding Night Elegance with Decorative Trimmings

  •  Sheet Set
  • Decorative Trimmings – Cluny Lace with Ribbon
  • Tulip Soft Matte fabric paint
  • Light Table
  • Fabric Marker
  • Thread
  • Paint Brushes & general painting supplies
  • Newspaper or white paper
  • Sewing Machine
  • Basic Sewing, Cutting, Measuring, Pressing Supplies and Tools

How To Create Wedding Night Elegance with Decorative Trimmings

  • Measure the top sheet and edges of pillow cases and purchase enough trim. Be sure to allow for an overlap.  A queen size set of sheets requires approximately 6 yards of trim.
  • Pin trim to the sheet and top stitch in place. You will need to stitch along either edge of the trim to secure it properly for  laundering.
  • Repeat stitching trim to the pillow case edges.
  • On your home computer, type Mr and Mrs, choose a font and enlarge it to the size desired. In the case of the project samples a 300 point font was used. Print onto copy paper.
  • Using a light table, lay the pattern directly onto the surface and cover with the pillowcase. Draw the pattern onto the surface of the pillowcase.
  • Insert sheets of paper or newsprint and following the traced pattern, fill in the lines using the fabric paint following the manufacturer’s directions.

 

 

 

DIY Lace and Braid Key FOB

DIY Lace & Braid Key FOB

Lace and Braid Key FOB

Dress your favorite keys with layers of layers of Decorative Trimmings. Simple step by step instructions will have you creating in no time at all. Great lace and braid stash buster.

Supplies for DIY Lace and Braid Key FOB:

Decorative Trimmings – Cluny Lace Edge, Chinese Braid & Soutach

Wash Away™ Wonder Tape

Dritz® Key Fob Hardware Set

Dazzle Tac Jewelry Glue™

Thread

Sewing Machine

Pliers

Basic Sewing, Measuring, Cutting and Pressing Tools & Supplies

How To DIY Lace and Braid Key FOB:

Cut the following the Lace and Braid Trimmings: two 12 inch lengths of Cluny Lace Edge, one 12 inch length from each of the Chinese trim and Soutach.

Lay the two 12 inch lengths of cluny lace edge trim next to each other. See Diagram A

Press fusible tape to the wrong side of the Chinese Braid. Remove the paper backing from the tape and press the Chinese Braid on top of the two layers of the Crochet Trim.

Stitch the  Soutach down the center of the Chinese Braid.

Stitch down either side of the Chinese Braid.

Trim the ends of the lace if necessary and apply a thin layer of jewelry glue. Fold and insert into the clamp. Close with pliers. To project the finish of the Key Fob clamp, use a small cloth between the pliers and the Key Fob or wrap the pliers in tape.

Attach the ring to the Key Fob clamp.

 

 

DIY Wrist Clutch with Lace Trim

Foldover Evening Bag 400

DIY Wrist Clutch Design by Lorine Mason

Simple foldover Wrist Clutch perfect for a pair of sunglasses, some lipstick and whatever else you might need on your next outing. Choose your favorite Decorative Trimmings and  dress up the the basic canvas fabric base. Slip the strap over your wrist and you are on your way.

Supplies for the DIY Wrist Clutch with Lace Trim:

  • Decorative Trimmings – Assorted
  • Canvas – 1/4 yard
  • Cotton print lining fabric – 1/4 yard
  • Medium weight fusible interfacing
  • Large snap fastener
  • 1 1/4 inch metal ring
  • Thread
  • Sewing Machine
  • Basic Sewing, Measuring, Cutting and Pressing Tools & Supplies

How To make a DIY  Wrist Clutch with Lace Trim:

Using the pattern, cut out one clutch from the canvas fabric, a second from the lining fabric and a third from the fusible interfacing. To request a full size pattern, leave a comment at the bottom of this post asking for the pattern for the DIY Wrist Clutch with Lace Trim.

Iron interfacing to the back of the purse. Press fold lines across the width of the purse using the measurements provided. Stitch two rows of lace trim across the front of the purse, spacing them 1/2 inch apart. See Diagram A

Wrist Clutch

Stitch braided trim on top of the lace trim. Stitch a second piece of braided trim along the bottom edge, placing it 1 1/4 inch up from the bottom edge. With right sides together, fold the strap tab in half and stitch using a 1/4 inch seam. Turn right side out, press , then top stitch down either side. Fold in half and insert metal ring. See Diagram B

Cut a 2 inch by 12 inch strip. With right sides together, fold in half and stitch using a 1/4 inch seam. Turn right side out, press, then top stitch down either side. Fold in half, and insert metal ring. Stitch across the raw ends. Turn the strap inside out, sliding the seam next to the ring and top stitch across the end.  See Diagram C

Pin the strap to the bag front, attaching it 1/4 inch below the upper fold line. See Diagram D

Wrist Clutch

With right sides together, cover the purse front with the purse lining. Stitch around the outside edges, using a 1/2 inch seam and leaving a 4 inch opening along one side. Clip corners, turn right side out and press.  See Diagram D

Create the purse pocket by folding the bottom edge of the purse along the lower fold line. Top stitch around the outside edge of the purse; stitching 3/8 of an inch from the outside edges. Create the purse flap by folding the top edge of the purse along the upper fold line.   Follow the manufacturer’s directions to apply a snap closure to the purse front.  See Diagram E

Visa, Discover, MasterCard, American Express, & PayPal