212-529-2740

Shopping Cart

Your cart is currently empty.

Tag Archives: DIY Wedding Night Elegance

Lace Embellished Belt

FullSizeRender1

Adding the finishing touch to a plain dress might be as simple as adding a flourish of painted lace to a piece of velvet ribbon. With the lace embellished belt tutorial, success is a given. Upon completion you will be sure to garner the attention your creativity deserves.

Lace Embellished Belt Supply List:

Venice Lace Spray 

1 1/2 inch wide velvet ribbon – waist measurement + 12 inches

Buckle suitable for 1 1/2 inch wide ribbon

Stiffen Stuff™ fabric stiffening spray

Fabri-Tac™ permanent adhesive

Acrylic craft paint – silver

Fabric painting medium

Paint brush

Fusible crystals & Crystal application tool

Wax paper

Basic sewing, cutting, measuring and pressing tools & supplies

Lace Embellished Belt How To:

Lay the lace spray on a flat surface and choose which elements will be incorporated into the design. Cut out the desired element.

Lay the lace on a piece of waxed paper and spray with Stiffen Stuff™, turn over and repeat. Let dry.

Following the manufacturer’s directions, mix fabric painting medium into the acrylic paint.

Using the paintbrush; brush the pre-mixed acrylic paint over the lace cutout. Take your time to assure complete coverage. Turn the lace over and repeat. Let dry.

Once dry, repeat if necessary.

Insert one end of the ribbon through the buckle, fold the ribbon over the buckle center letting it extend 2 1/2 inches. Turn the raw edge of the ribbon under 1/2 inch and top stitch through all layers of the ribbon to secure the buckle onto the ribbon.

Cut the opposite end of the ribbon at a 45 degree angle.

Try on the ribbon belt and mark the center front point.

Position the lace accent on top of the ribbon, matching the center points. Remove and carefully add glue to the back of the lace accent. Reposition the lace accent onto the ribbon and place a heavy object on top. Let dry.

Following the manufacturer’s directions; apply fusible crystal accents to the lace as desired.

 

 

 

DIY Wedding Night Elegance with Decorative Trimmings

Wedding Night Elegance

With the addition of rows of lace trimmings and a quick stencil project, a simple set of sheets becomes a lovely wedding gift for any new couple.  DIY Wedding Night Elegance with decorative trimmings is truly a gift from your heart.

Supplies for Wedding Night Elegance with Decorative Trimmings

  •  Sheet Set
  • Decorative Trimmings – Cluny Lace with Ribbon
  • Tulip Soft Matte fabric paint
  • Light Table
  • Fabric Marker
  • Thread
  • Paint Brushes & general painting supplies
  • Newspaper or white paper
  • Sewing Machine
  • Basic Sewing, Cutting, Measuring, Pressing Supplies and Tools

How To Create Wedding Night Elegance with Decorative Trimmings

  • Measure the top sheet and edges of pillow cases and purchase enough trim. Be sure to allow for an overlap.  A queen size set of sheets requires approximately 6 yards of trim.
  • Pin trim to the sheet and top stitch in place. You will need to stitch along either edge of the trim to secure it properly for  laundering.
  • Repeat stitching trim to the pillow case edges.
  • On your home computer, type Mr and Mrs, choose a font and enlarge it to the size desired. In the case of the project samples a 300 point font was used. Print onto copy paper.
  • Using a light table, lay the pattern directly onto the surface and cover with the pillowcase. Draw the pattern onto the surface of the pillowcase.
  • Insert sheets of paper or newsprint and following the traced pattern, fill in the lines using the fabric paint following the manufacturer’s directions.

 

 

 

Visa, Discover, MasterCard, American Express, & PayPal