212-529-2740

Shopping Cart

Your cart is currently empty.

Lace Embellished Belt

FullSizeRender1

Adding the finishing touch to a plain dress might be as simple as adding a flourish of painted lace to a piece of velvet ribbon. With the lace embellished belt tutorial, success is a given. Upon completion you will be sure to garner the attention your creativity deserves.

Lace Embellished Belt Supply List:

Venice Lace Spray 

1 1/2 inch wide velvet ribbon – waist measurement + 12 inches

Buckle suitable for 1 1/2 inch wide ribbon

Stiffen Stuff™ fabric stiffening spray

Fabri-Tac™ permanent adhesive

Acrylic craft paint – silver

Fabric painting medium

Paint brush

Fusible crystals & Crystal application tool

Wax paper

Basic sewing, cutting, measuring and pressing tools & supplies

Lace Embellished Belt How To:

Lay the lace spray on a flat surface and choose which elements will be incorporated into the design. Cut out the desired element.

Lay the lace on a piece of waxed paper and spray with Stiffen Stuff™, turn over and repeat. Let dry.

Following the manufacturer’s directions, mix fabric painting medium into the acrylic paint.

Using the paintbrush; brush the pre-mixed acrylic paint over the lace cutout. Take your time to assure complete coverage. Turn the lace over and repeat. Let dry.

Once dry, repeat if necessary.

Insert one end of the ribbon through the buckle, fold the ribbon over the buckle center letting it extend 2 1/2 inches. Turn the raw edge of the ribbon under 1/2 inch and top stitch through all layers of the ribbon to secure the buckle onto the ribbon.

Cut the opposite end of the ribbon at a 45 degree angle.

Try on the ribbon belt and mark the center front point.

Position the lace accent on top of the ribbon, matching the center points. Remove and carefully add glue to the back of the lace accent. Reposition the lace accent onto the ribbon and place a heavy object on top. Let dry.

Following the manufacturer’s directions; apply fusible crystal accents to the lace as desired.

 

 

 

DIY Lace Espadrilles

DIY Lace Espadrilles

DIY shoe making is the rage right now and DIY Lace Espadrilles fit within that trend beautifully. Dritz® espadrilles can make that happen with a complete range of products from the soles to the pins and needles. Creating your very own espadrilles covered from tip to toe in Decorative Trimmings elegant lace trim takes it to the next level.

DIY Lace Espadrilles Supplies:

2 yards appx Venice Lace – Gothic Rose Venice Lace

Dritz® espadrille soles, interfacing,  and supplies

1/4  yard each of woven medium weight fabric & lining of your choice

Basic sewing, pressing, measuring and cutting supplies

DIY Lace Espadrilles How To:

Following the manufacturer’s directions included in the packaging, cut out two front and two back pieces from the fabric and lining of your choice.

1. Lay lace across the right side of the front fabric, following the gentle curve of the pattern piece. Pin in place. Note: the first piece of lace should be set 1/4 inch below the top edge. 

2.Continue adding rows of lace, tucking in each of the rows under the first.

3.Adjust the placement of the rows of lace so that the last row ends with the bottom edge.

4.Repeat adding lace to the right sides of the back fabric.

Cover the lace covered pieces with linings and pin together. Continue following the manufacturer’s instructions to complete the espadrilles.

Note:  Espadrilles will stay cleaner longer if you spray the surface with a protection spray such as ScotchGuard®.

DIY Lace Espadrille Step Outs

DIY Lace Espadrille Step Outs

Visa, Discover, MasterCard, American Express, & PayPal