212-529-2740

Shopping Cart

Your cart is currently empty.

Wedding Scape with Decorative Trimmings

Decorative-Trimmings-Outdoor-Wedding-Scape-Final

 

Wedding Scape with Decorative Trimmings

Design by Lorine Mason

Create an elegant wedding scape by combining burlap ribbon and Decorative Trimmings wide assortment of trims. The perfect setting for the new couple to enjoy their first meal together as Mr. & Mrs.

Supplies for Wedding Scape with Decorative Trimmings:

  • Decorative Trimmings Fantasy Trimmings
  • 4 & 6 inch wide burlap ribbon
  • Two 1/2 inch buttons
  • Two small wooden plaques
  • Alphabet stickers
  • Glue gun & glue sticks
  • Hole punch or small drill
  • Sewing machine
  • Basic sewing,  measuring, pressing and cutting tools & supplies

Decorative Trimmings Outdoor Wedding Scape Chair Bow

Mr & Mrs Name Plaque How To:

Apply stickers to the front of the plaques.

Drill two holes along the either side of the top edge of the plaques.

Insert cord trim through the holes and tie the ends together using an overhand knot.

Glue trim around the outside edge of each of the plaques.

Hang plaques from the center of each bow.

Chair Bow How To:

Cut two 2 1/2 yard lengths of 4 inch wide burlap ribbon for each bow.

Stitch trims to the burlap ribbon, starting at the center point and working your way to the edge of the ribbon. The number of trims will be determined by the width of each trim you have chosen.

Tie three loop bows with each length of the ribbon.

Decorative-Trimmings-Outdoor-Wedding-Scape-Closeup

Napkin Ring How To:

Cut one 6 inch length of 4 inch burlap ribbon for each napkin ring.

Stitch trims to the burlap ribbon, starting at the center point and working your way to the edge of the ribbon. The number of trims will be determined by the width of each trim you have chosen.

Fold the burlap ribbon in half, right sides together and stitch using a 1/2 inch seam. Turn right side out.

Create a figure eight loop of trim. Glue the bow, topped with a button to the center top of the napkin ring.

Table Runner How To:

Determine the length of the table runner by measuring the table and adding the drop down each side. Add 2 inches to the measurement and cut a piece of 6 inch wide burlap this length.

In the sample project, trim was stitched 1 inch from either edge down the length of the ribbon. A second row of trim was then stitched along the inside edge of the first rows.

Fold each of the runner ends in half right sides together and stitch using a 1/2 inch seam. Turn right side out and press carefully, forming a point at each end.

Leave a Reply

Your email address will not be published. Required fields are marked *

Visa, Discover, MasterCard, American Express, & PayPal

%d bloggers like this: